Item | Conditions | Characteristics | |
---|---|---|---|
Category Temperature Range | -55 to +105 ℃ | ||
Rated Voltage Range | 2 to 2.5Vdc | ||
Capacitance Tolerance | at 20℃,120Hz | ±20 % (M);Y:+10~ -35% | |
Leakage Current | at 20℃after 2 minutes | I ≦ 0.1CV (2 V.DC to 2.5 V.DC) I:LeakageCurrent(μA), C:Rated Capacitance(μF), V:RatedVoltage(V) |
|
Surge Voltage | 15 to 35℃ | Rated voltage × 1.25 (2 V.DC to 2.5 V.DC) | |
Dissipation Factor (tanδ) | at 20℃,120Hz | Case Height : S Type, 0.06 max. | |
Endurance | 105℃,rated voltage applied, 2000 hrs. | Appearance | No significant damage |
Capacitance Change |
±20%of the initial value | ||
Dissipation Factor |
£200% ofthe initial specifiedvalue | ||
Leakage Current | 2V.DC to 2.5 V.DC £300% of the initial specified value |
||
Damp Heat, Steady State | 60℃,90 to 95%RH, 500 hrs. | Appearance | No significant damage |
Capacitance Change |
(2 V.DC to 2.5 V.DC)+70%, -20% |
||
Dissipation Factor |
£200% of the initial specified value | ||
Leakage Current | 2V.DC to 2.5 V.DC withinthe initial specified value |
||
Surge Voltage | The capacitors shal be subjected to 1000 cycles each consisting of charge with the surgevoltages, at 15℃to35℃for 30 seconds through a protective resistor (R=1KΩ)and discharge for 5min 30 seconds. |
Appearance | No significant damage |
Capacitance Change |
±10% of the initial value | ||
Dissipation Factor |
within the initialspecified value | ||
Leakage Current | within the initial specified value |
Rated voltage (DC) (V) |
Capacitance (μF) |
tanδ Max. @120Hz |
Leakage Current (μA) |
ESR (mΩ) |
Rated Ripple Current (A r.ms) |
Part No. |
---|---|---|---|---|---|---|
2
|
220 | 0.06 | 44 | 9 | 6.3 | ACAL2R0S221E09 |
220 | 0.06 | 44 | 9 | 6.3 | ACAL2R0S221E09Y | |
330 | 0.06 | 66 | 6 | 7.5 | ACAL2R0S331E06 | |
330 | 0.06 | 66 | 9 | 6.3 | ACAL2R0S331E09 | |
330 | 0.06 | 66 | 9 | 6.3 | ACAL2R0S331E09Y | |
470 | 0.06 | 94 | 3 | 10.2 | ACAL2R0S471E03 | |
470 | 0.06 | 94 | 4.5 | 8.5 | ACAL2R0S471E04 | |
470 | 0.06 | 94 | 6 | 7.5 | ACAL2R0S471E06 | |
470 | 0.06 | 94 | 9 | 6.3 | ACAL2R0S471E09 | |
470 | 0.06 | 94 | 9 | 6.3 | ACAL2R0S471E09Y | |
2.5 | 220 | 0.06 | 55 | 9 | 6.3 | ACAL2R5S221E09 |
220 | 0.06 | 55 | 9 | 6.3 | ACAL2R5S221E09Y | |
330 | 0.06 | 82.5 | 6 | 7.5 | ACAL2R5S331E06 | |
330 | 0.06 | 82.5 | 9 | 6.3 | ACAL2R5S331E09 | |
330 | 0.06 | 82.5 | 9 | 6.3 | ACAL2R5S331E09Y | |
470 | 0.06 | 117.5 | 3 | 10.2 | ACAL2R5S470E03 | |
470 | 0.06 | 117.5 | 4.5 | 8.5 | ACAL2R5S470E04 | |
470 | 0.06 | 117.5 | 6 | 7.5 | ACAL2R5S470E06 | |
470 | 0.06 | 117.5 | 9 | 6.3 | ACAL2R5S470E09 |
TemperatureCompensation Multipliers for Ripple Current | |||
---|---|---|---|
≦45°C | 45°C< T ≦85°C | 85°C< T ≦105°C | |
2V.DC to 2.5V.DC | 1.0 | 0.7 | 0.25 |
ACAL | 2R5 | S | 331 | E06 | |
---|---|---|---|---|---|
Product Series |
Rated Voltage 2R5: 2.5V |
Case Height S:1.9mm |
Capacitance 331 : 330µF |
ESR E06:6mΩ |
Suffix for special code Y=+10~-35% |