High Temperature
Item | Conditions | Characteristics | |
---|---|---|---|
Category Temperature Range | -55 to +125 ℃ | ||
Rated Voltage Range | 2 to 25Vdc | ||
Capacitance Tolerance | at 20℃, 120Hz | ±20 % (M);Y:+10 ~ -35%;K:±10 % | |
Leakage Current | at 20℃ after 2 minutes |
I ≦ 0.1CV (2V.DC to 2.5V.DC) I ≦ 0.3CV (16V.DC to 25V.DC) |
|
Surge Voltage | 15 to +35℃ |
Rated voltage × 1.25 (2 V.DC to 16 V.DC) Rated voltage × 1.15 (20 V.DC to 25 V.DC) |
|
Dissipation Factor (tanδ) | at 20℃,120Hz | ≦0.1 | |
Endurance | 125℃, rated voltage applied, 1000 hrs. | Appearance | No significant damage |
Capacitance Change | ±20% of the initial value | ||
Dissipation Factor | ≤ 200% of the initial specified value | ||
Leakage Current | within the initial specified value | ||
Damp Heat, Steady State | 60℃, 90 to 95%RH, 500 hrs | Appearance | No significant damage |
Capacitance Change |
(2V.DC to 2.5V.DC)+70%, -20% of the |
||
Dissipation Factor | ≤ 200% of the initial specified value | ||
Leakage Current |
2 V.DC to 2.5 V.DC |
||
Surge Voltage | The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages, 125% rated voltage, at 15~35℃ for 30 seconds through a protective resistor(R=1KΩ)and discharge for 5min 30 seconds. |
Appearance | No significant damage |
Capacitance Change | ±10% of the initial value | ||
Dissipation Factor | within the initial specified value | ||
Leakage Current | within the initial specified value | ||
Solderability | Pb-free solder Around 25% rosin melted ethanol or isopropylalcohol Temperature:245 ± 5 ℃ Immersing time:2 ± 0.5 s |
More than 95% of outer terminal surface to be covered | |
Resistance to Solvents | Solvent:isopropylalcohol Immersing time:30 ± 5 s Room temperature |
No significant damage and marking readable |
Rated voltage (DC) (V) |
Capacitance (μF) |
tanδ Max. @120Hz |
Leakage Current (μA) |
ESR (mΩ) |
Rated Ripple Current (A)(r.m.s) |
Part No. | |
---|---|---|---|---|---|---|---|
105℃ | 125℃ | ||||||
2 | 1.6 | 330 | 0.1 | 66.0 | 9 | 6.3 | ACTH2R0S331E09 |
330 | 0.1 | 66.0 | 9 | 6.3 | ACTH2R0S331E09Y | ||
330 | 0.1 | 66.0 | 6 | 7.5 | ACTH2R0S331E06 | ||
2.5 | 2 | 330 | 0.1 | 82.5 | 9 | 6.3 | ACTH2R5S331E09 |
330 | 0.1 | 82.5 | 9 | 6.3 | ACTH2R5S331E09Y | ||
330 | 0.1 | 82.5 | 6 | 7.5 | ACTH2R5S331E06 | ||
330 | 0.1 | 82.5 | 4.5 | 8.5 | ACTH2R5S331E04 | ||
16 | 16 | 47 | 0.1 | 225.6 | 40 | 3.2 | ACTH160S470E40 |
56 | 0.1 | 268.8 | 40 | 3.2 | ACTH160S560E40 | ||
25 | 25 | 15 | 0.1 | 112.5 | 40 | 3.2 | ACTH250S150E40 |
33 | 0.1 | 247.5 | 40 | 3.2 | ACTH250S330E40 |
TemperatureCompensation Multipliers for Ripple Current | |||||||
---|---|---|---|---|---|---|---|
Temperature | T≦45℃ | 45℃ <T≦ 85℃ | 85℃<T≦105℃ | 125℃<T | |||
2 V.DC to 2.5 V.DC | 1.0 | 0.7 | 0.25 | 0.25 | |||
16 V.DC to 25 V.DC | 1.0 | 0.8 | 0.5 | 0.25 |
ACTH | 2R0 | S | 471 | E06 | |
---|---|---|---|---|---|
Product |
Rated Voltage 2R0: 2.0V |
Case Height S:1.9mm |
Capacitance 471 : 470µF |
ESR E06:6mΩ E04:4.5mΩ |
Suffix for special code |