Low ESR
| Item | Conditions | Characteristics | |
|---|---|---|---|
| Category Temperature Range | -55 to +105 ℃ | ||
| Rated Voltage Range | 2 to 25 Vdc | ||
| Capacitance Tolerance | at 20℃, 120Hz | ±20 % (M)；Y：+10 ~ -35% | |
| Leakage Current | at 20℃ after 2 minutes | I ≦ 0.1CV (2 V.DC to 6.3 V.DC) I ≦ 0.3CV (10 V.DC to 25 V.DC) I：Leakage Current(μA), C：Rated Capacitance(μF), V：Rated Voltage(V) |
|
| Surge Voltage | 15 to +35℃ | Rated voltage × 1.25 (2 V.DC to 16 V.DC) Rated voltage × 1.15 (20 V.DC to 25 V.DC) |
|
| Dissipation Factor (tanδ) | at 20℃，120Hz | 0.06 max. | |
| Endurance | 105℃, rated voltage applied, 2000 hrs. | Appearance | No significant damage |
| Capacitance Change | ±20% of the initial value | ||
| Dissipation Factor | ≤ 200% of the initial specified value | ||
| Leakage Current | 2 V.DC to 6.3 V.DC ≤ 300% of the initial specified value 10 V.DC to 25 V.DC ≤ within the initial limit |
||
| Damp Heat, Steady State | 60℃, 90 to 95%RH, 500 hrs. | Appearance | No significant damage |
| Capacitance Change | (2 V.DC to 2.5 V.DC) +70%, -20% of the initial value (10 V.DC to 25 V.DC) +60%, -20% of the initial value |
||
| Dissipation Factor | ≤ 200% of the initial specified value | ||
| Leakage Current | 2 V.DC to 6.3 V.DC within the initial specified value 10 V.DC to 25 V.DC ≤ 300% of the initial specified value |
||
| Surge Voltage | The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltages, at 15℃ to 35℃ for 30 seconds through a protective resistor(R=1KΩ) and discharge for 5min 30 seconds. |
Appearance | No significant damage |
| Capacitance Change | ±10% of the initial value | ||
| Dissipation Factor | within the initial specified value | ||
| Leakage Current | within the initial specified value | ||
|
Rated voltage (DC) (V) |
Capacitance (μF) |
tanδ Max. @120Hz |
Leakage Current (μA) |
ESR (mΩ) |
Rated Ripple Current (mA)(rms) |
Part No. |
|---|---|---|---|---|---|---|
| 2 | 470 | 0.06 | 94 | 9 | 6,300 | ACAH2R0S471E09 |
| 470 | 0.06 | 94 | 9 | 6,300 | ACAH2R0S471E09Y | |
| 470 | 0.06 | 94 | 6 | 7,500 | ACAH2R0S471E06 | |
| 470 | 0.06 | 94 | 4.5 | 8,500 | ACAH2R0S471E04 | |
| 470 | 0.06 | 94 | 3.0 | 10,200 | ACAH2R0S471E03 | |
| 560 | 0.06 | 112 | 4.5 | 8,500 | ACAH2R0S561E04 | |
| 2.5 | 470 | 0.06 | 117.5 | 9 | 6,300 | ACAH2R5S471E09 |
| 470 | 0.06 | 117.5 | 9 | 6,300 | ACAH2R5S471E09Y | |
| 470 | 0.06 | 117.5 | 6 | 7,500 | ACAH2R5S471E06 | |
| 470 | 0.06 | 117.5 | 4.5 | 8,500 | ACAH2R5S471E04 | |
| 470 | 0.06 | 117.5 | 3.0 | 10,200 | ACAH2R5S471E03 | |
| 560 | 0.06 | 140 | 4.5 | 8,500 | ACAH2R5S561E04 | |
| 10 | 100 | 0.06 | 300 | 40 | 3,200 | ACAH100S101E40 |
| 100 | 0.06 | 300 | 40 | 3,200 | ACAH100S101E40Y | |
| 16 | 47 | 0.06 | 225.6 | 40 | 3,200 | ACAH160S470E40 |
| 56 | 0.06 | 268.8 | 40 | 3,200 | ACAH160S560E40 | |
| 68 | 0.06 | 326.4 | 40 | 3,200 | ACAH160S680E40 | |
| 20 | 33 | 0.06 | 198 | 40 | 3,200 | ACAH200S330E40 |
| 25 | 33 | 0.06 | 237.5 | 40 | 3,200 | ACAH250S330E40 |
| TemperatureCompensation Multipliers for Ripple Current | |||
|---|---|---|---|
| ≦45℃ | 45℃ |
85℃ |
|
| 2V.DC to 6.3V.DC | 1.0 | 0.7 | 0.25 |
| 10V.DC to 25V.DC | 1.0 | 0.8 | 0.5 |
| ACAH | 2R5 | S | 471 | E04 | |
|---|---|---|---|---|---|
|
Product Series |
Rated Voltage 2R5: 2.5V.DC |
Case Height S:1.9mm |
Capacitance 471=470μF |
ESR E04：4.5mΩ |
Suffix for special code Y=+10~-35% |
